eSUN Filament ePLA-Gloss Blue


3D Printer filament PETG feature

Extracted and purified from corn grain; high rigidity, good glossiness;

Suitable for printing larger models;

The surface of the printouts will be smoother and more delicate;

No cracking problem.

Environment friendly and non-toxic

Out of stock

Categories: , Tag:


eSUN  3D Printer Filamente ePLA-Gloss Blue

Diameter :1.75mm
N.W.: 1.0kg

ePLA-Gloss is a cost-effective PLA material that is environmentally friendly and easy to print.

Compared with ABS, ePLA has higher rigidity and PC-like strength, and does not require a closed cavity, low shrinkage, no warping, no cracking, and can print large-size models

Compared with other materials, the support is easier to peel from the surface of the model, and the surface of the contact surface is smooth and flat;

No irritating odour during printing, safe and environmentally friendly.

The wire reel is made by reusing injection moulding based on PETG, ABS, PLA and other production waste and industrial waste. The outer box is made of recyclable cartons. The environmental protection concept makes 3D printing more sustainable;

The glossy surface effect, smooth surface; the lines are not easy to be broken, and the printing is smooth for a long time without clogging. It can be used for early concept models and rapid prototyping.



Selling points: green; cost-effective; high-speed printing; easy to peel support; excellent printability; lines are not easy to brittle; bright surface effect.

Filament Properties Table
 Density(g/cm3) 1.26
 Heat Distortion Temp(℃,0.45MPa) 56.70
  Melt Flow Index(g/10min) 3.3(190℃/2.16kg)
 Tensile Strength(MPa) 64.51
 Elongation at Break(%) 31.54
 Flexural Strength(MPa) 68.99
  Flexural Modulus(MPa) 1514.78
 IZOD Impact Strength(kJ/㎡) 7.9
 Durability 4/10
 Printability 9/10
 Extruder Temperature(℃) 190 – 230℃
 Bed temperature(℃) 60°C
 Fan Speed 100%
 Printing Speed 40 – 100mm/s
 Heated Bed 可选       Optional
 Recommended Build Surfaces 美纹纸,PVP固体胶,PEI


There are no reviews yet.

Be the first to review “eSUN Filament ePLA-Gloss Blue”

Your email address will not be published.